What is the D-Link router login address?

http://dlinkrouter, http://dlinkrouter.local or http://192.168.0.1.

Is the D-Link password really blank?

Often on older models, but not on all. Treat the label as the final answer and always set a password.

D-Link Router Login: 192.168.0.1 and dlinkrouter.local

Open this address: 192.168.0.1 · dlinkrouter.localThese open only from a device connected to your own router. They cannot be reached from the internet.

D-Link routers such as the DIR-605L open at http://dlinkrouter, http://dlinkrouter.local and http://192.168.0.1, and the password field is blank if you never changed it. Other D-Link models can differ, so check your label and manual.

Not working? Try another address: 192.168.1.1 192.168.0.1 192.168.1.254 10.0.0.1 192.168.100.1 192.168.8.1

D-Link router login: type 192.168.0.1 in the browser address bar

Quick facts about D-Link

Address to type: http://192.168.0.1 or http://dlinkrouter.local
Username: Usually admin
Password: Often blank, or on the label
Where it opens: Only on a device connected to this router

Which routers this page covers

D-Link home routers
Older and newer D-Link models differ in defaults

How to log in to your D-Link router

Connect to the D-Link router by Wi-Fi or cable.
Open http://192.168.0.1 or http://dlinkrouter.local.
Enter admin and leave the password blank, or use the label. Newer models ask you to set a password at setup.
Open the Wi-Fi settings, change the name and password, and save.
Set an admin password straight away if the router still has a blank one.

Example router label: the web address, username and admin password are the lines you need to log in, and they are different from the Wi-Fi name and password — Illustration only, not a photo of a real product. The login details are usually on a label under the router.

If it will not open

After I click Save, the router goes quiet: It can take at least 80 seconds to save the changes and restart. Do not unplug it.
I registered the router with mydlink: You can also change its settings from the mydlink website after you sign in.
Blank password is rejected: The password may have been set during setup. If you forgot it, a reset is needed. See the reset guide.
dlinkrouter.local does not load: Use the IP address 192.168.0.1 instead.
A search page opens instead of the router: Type http:// before the address, and type it in the address bar, not the search box.
The browser warns “not secure”: Many routers use plain http or a self-signed certificate, so the warning is normal on your own router. Do not click through it on public Wi-Fi.
Wrong username or password: The admin password is not your Wi-Fi password. Check the router label. If you changed it and forgot it, see the reset guide.
The page loads forever: A VPN, a proxy or a second router in between can block it. Turn off the VPN and try a LAN cable. If you put your own router behind the ISP one, the ISP router has a different address from your own.

How to keep your router secure

Change the default admin password and use a long one that you do not use anywhere else.
Keep the router firmware up to date.
Turn off remote management unless you really need it.
Use WPA2 or WPA3 for Wi-Fi.

Questions people ask about D-Link

What is the D-Link router login address?: http://dlinkrouter, http://dlinkrouter.local or http://192.168.0.1.
Is the D-Link password really blank?: Often on older models, but not on all. Treat the label as the final answer and always set a password.

Last checked 2026-10-02. Default logins differ by model, so always check the label on your router first. Brand and product names belong to their owners. This site is independent and is not affiliated with them. Sources: D-Link: how to change the Wi-Fi password (DIR-605L) · RFC 1918: private address ranges

Free tools that help

Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.