Bell Modem Login: bell.ca/mymodem and 192.168.2.1
Open Bell Home Hub and Giga Hub settings at bell.ca/mymodem or 192.168.2.1 and find the administrator password for your modem.
Open this address: 192.168.2.1These open only from a device connected to your own router. They cannot be reached from the internet.
On a device connected to your Bell modem, open bell.ca/mymodem or 192.168.2.1. You may be asked for the administrator password. Bell says where to find it depends on the modem: the front screen on a Giga Hub or Home Hub 4000, and the serial number sticker on a Home Hub 3000.
Not working? Try another address: 192.168.1.1192.168.0.1192.168.1.25410.0.0.1192.168.100.1192.168.8.1
Quick facts about Bell
- Address to type
- http://bell.ca/mymodem or http://192.168.2.1
- Used by
- Bell Home Hub 3000 and 4000, Giga Hub and Giga Hub 2.0
- Default username and password
- Administrator password, found as the table shows
- Where it opens
- Only on a device connected to this router
Which routers this page covers
- Bell Home Hub 3000
- Bell Home Hub 4000
- Bell Giga Hub and Giga Hub 2.0
How to log in to your Bell router
- Connect your device to the modem.
- Open a browser and go to bell.ca/mymodem or 192.168.2.1.
- Enter the administrator password if asked. Find it as the table shows.
- To change it later, click Modem preferences, then enter the current and new passwords.
Where to find the administrator password
| Modem | Where to find it |
|---|---|
| Giga Hub 2.0, Giga Hub, Home Hub 4000 | Front screen: press up or down to Modem Management, then OK |
| Home Hub 3000 | Serial number on the sticker on the back |
If you have already changed the password, use the one you set.
If the Bell page will not open
- The page does not load
- Check you are connected to this router, not mobile data or another Wi-Fi. If your computer’s gateway shows a different address, use the router IP finder.
- A search page opens instead of the router
- Type http:// before the address, and type it in the address bar, not the search box.
- Wrong username or password
- The admin password is not always your Wi-Fi password. Check the label on the router. If you changed it and forgot it, see the reset guide.
- Two routers on the same address
- If your own router sits behind an ISP box that uses the same range, see own router behind an ISP router.
How to keep your router secure
- Change the default admin password and use a long one that you do not use anywhere else.
- Keep the router firmware up to date.
- Turn off remote management unless you really need it.
- Use WPA2 or WPA3 for Wi-Fi.
Questions people ask about Bell
- Which address does a Bell modem use?
- bell.ca/mymodem or 192.168.2.1.
- Where is the Bell administrator password?
- On a Giga Hub 2.0, Giga Hub or Home Hub 4000, use the arrow on the front until Modem Management shows, then press OK. On a Home Hub 3000 it is the serial number on the sticker on the back.
Free tools that help
- Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
- Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.