Digisol Router Login: 192.168.1.1 and 192.168.2.1
Log in to a Digisol router at 192.168.1.1 or 192.168.2.1, see the usual admin login by model, and fix the page when it will not open.
Open this address: 192.168.1.1 · 192.168.2.1These open only from a device connected to your own router. They cannot be reached from the internet.
Digisol routers open at 192.168.1.1 or 192.168.2.1, depending on the model. The usual login is admin, with admin or 1234 as the password. The table below shows the common defaults by model. If your router came from an ISP, or someone changed the password, the label on the device is the final answer.
Not working? Try another address: 192.168.1.1192.168.0.1192.168.1.25410.0.0.1192.168.100.1192.168.8.1
Quick facts about Digisol
- Address to type
- http://192.168.1.1 or http://192.168.2.1, by model
- Used by
- Digisol broadband and wireless routers
- Default username and password
- admin with admin or 1234, by model. See the table below
- Where it opens
- Only on a device connected to this router
Which routers this page covers
- Digisol ADSL and wireless routers such as the DG-BG4011N, DG-BR4000N and DG-HR3400
How to log in to your Digisol router
- Connect your phone or computer to the Digisol router by Wi-Fi or cable.
- Open a browser and type 192.168.1.1. If nothing opens, type 192.168.2.1.
- Enter the username admin and the password from the table for your model. If it fails, try admin and admin.
- Open the Wi-Fi settings to change the network name and password, then save.
Common Digisol defaults by model
| Model | Address | Username | Password |
|---|---|---|---|
| DG-BG4011N | 192.168.1.1 | admin | admin |
| DG-BG4100NU | 192.168.1.1 | admin | admin |
| DG-BG4300N | 192.168.1.1 | admin | 1234 |
| DG-BR4000N | 192.168.2.1 | admin | 1234 |
| DG-BR4015N | 192.168.2.1 | admin | admin |
| DG-HR1400 | 192.168.2.1 | admin | admin |
| DG-HR3300TA | 192.168.2.1 | admin | 1234 |
| DG-HR3400 | 192.168.2.1 | admin | 1234 |
These are common factory defaults. They can differ by hardware version and firmware.
If the Digisol page will not open
- 192.168.1.1 does not load
- Try 192.168.2.1. Digisol models use one or the other.
- The login is rejected
- Someone may have changed the password, or your ISP may have set its own. Try the label on the router. As a last step, press and hold the reset button for about 10 seconds. A reset erases your settings.
- Your router sits behind an ISP box that also uses 192.168.1.1
- Both devices then share the same address range. See own router behind an ISP router.
How to keep your router secure
- Change the default admin password and use a long one that you do not use anywhere else.
- Keep the router firmware up to date.
- Turn off remote management unless you really need it.
- Use WPA2 or WPA3 for Wi-Fi.
Questions people ask about Digisol
- What is the Digisol router IP address?
- 192.168.1.1 on some models and 192.168.2.1 on others.
- What is the Digisol default username and password?
- Usually admin with admin or 1234, depending on the model. Check the table on this page and the label on your router.
Free tools that help
- Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
- Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.