iBall Router Login: 192.168.1.1 Admin Page
Log in to an iBall Baton router at 192.168.1.1, use the usual admin login, and fix the page when it will not open.
Open this address: 192.168.1.1These open only from a device connected to your own router. They cannot be reached from the internet.
iBall Baton routers open at 192.168.1.1. The usual login is admin with the password admin. These defaults are common across the Baton range, but an older router may have a changed password, so try the label and then a factory reset.
Not working? Try another address: 192.168.1.1192.168.0.1192.168.1.25410.0.0.1192.168.100.1192.168.8.1
Quick facts about iBall
- Address to type
- http://192.168.1.1
- Used by
- iBall Baton wireless and ADSL routers
- Default username and password
- admin and admin on most models
- Where it opens
- Only on a device connected to this router
Which routers this page covers
- iBall Baton wireless routers such as the iB-WRA150N, iB-WRB302N and iB-WRX150N
- iBall Baton ADSL router iB-LR6111A
How to log in to your iBall router
- Connect your phone or computer to the iBall router by Wi-Fi or cable.
- Open a browser and type 192.168.1.1 in the address bar.
- Enter admin as the username and admin as the password.
- Open the Wireless settings to change the network name and password, then save.
- Change the admin password after you log in.
If the iBall page will not open
- 192.168.1.1 does not load
- Check that you are on the iBall router’s Wi-Fi or cable, not on mobile data. Use http:// in front of the address.
- admin and admin are rejected
- Someone may have changed the password. Press and hold the reset button for about 10 seconds with a pin to restore the defaults. A reset erases your settings.
- Your router sits behind an ISP box that also uses 192.168.1.1
- Both devices then share the same address range. See own router behind an ISP router.
How to keep your router secure
- Change the default admin password and use a long one that you do not use anywhere else.
- Keep the router firmware up to date.
- Turn off remote management unless you really need it.
- Use WPA2 or WPA3 for Wi-Fi.
Questions people ask about iBall
- What is the iBall router IP address?
- 192.168.1.1 on the Baton routers.
- What is the iBall default username and password?
- Usually admin and admin. Change them after you log in.
Free tools that help
- Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
- Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.