Keenetic Router Login: my.keenetic.net and 192.168.1.1
Open the Keenetic web interface at my.keenetic.net or 192.168.1.1, set the admin password during setup, and fix the page when it will not open.
Open this address: 192.168.1.1These open only from a device connected to your own router. They cannot be reached from the internet.
Open my.keenetic.net or 192.168.1.1 in a browser on a device connected to the Keenetic. There is no fixed password to look up: the setup wizard requires you to set the password for the admin account. If you forget it, the Reset button restores factory settings.
Not working? Try another address: 192.168.1.1192.168.0.1192.168.1.25410.0.0.1192.168.100.1192.168.8.1
Quick facts about Keenetic
- Address to type
- http://my.keenetic.net or http://192.168.1.1
- Used by
- Keenetic routers
- Default username and password
- User admin, with the password you set in the setup wizard
- Where it opens
- Only on a device connected to this router
Which routers this page covers
- Keenetic home routers and extenders that use the Keenetic setup wizard
How to log in to your Keenetic router
- Connect your device to the Keenetic by Wi-Fi or cable.
- Open a browser and go to my.keenetic.net. If that does not load, try 192.168.1.1.
- Follow the setup wizard. Setting a password for the admin account is required.
- Later, sign in with admin and that password.
Keenetic login
| Setting | Value |
|---|---|
| Address | my.keenetic.net or 192.168.1.1 |
| Username | admin |
| Password | Set by you in the setup wizard |
Keenetic does not use a shared default password.
If the Keenetic page will not open
- The page does not load
- Check you are connected to this router, not mobile data or another Wi-Fi. If your computer’s gateway shows a different address, use the router IP finder.
- A search page opens instead of the router
- Type http:// before the address, and type it in the address bar, not the search box.
- Wrong username or password
- The admin password is not always your Wi-Fi password. Check the label on the router. If you changed it and forgot it, see the reset guide.
- Two routers on the same address
- If your own router sits behind an ISP box that uses the same range, see own router behind an ISP router.
How to keep your router secure
- Change the default admin password and use a long one that you do not use anywhere else.
- Keep the router firmware up to date.
- Turn off remote management unless you really need it.
- Use WPA2 or WPA3 for Wi-Fi.
Questions people ask about Keenetic
- Which address does Keenetic use?
- my.keenetic.net or 192.168.1.1.
- What if I forget the admin password?
- Keenetic says to use the Reset button to restore factory settings. Everything you set is removed, so use it only when you must.
Free tools that help
- Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
- Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.