How do I reset a Sky Hub?

Hold the reset button on the back for ten seconds until the power light flashes. It removes your changes.

Sky Hub Login: 192.168.0.1, admin and the Sky Password

Open the Sky Hub settings at 192.168.0.1 with the username admin, find which password your hub uses, and reset it with the 10-second button hold.

Open this address: 192.168.0.1These open only from a device connected to your own router. They cannot be reached from the internet.

Open 192.168.0.1 and enter the username admin with the password sky, or your Wi-Fi password, depending on the hub. Holding the reset button on the back of the Sky Hub for ten seconds, until the power light flashes, brings the hub back to its default login.

Not working? Try another address: 192.168.1.1 192.168.0.1 192.168.1.254 10.0.0.1 192.168.100.1 192.168.8.1

Sky Broadband router login: type 192.168.0.1 in the browser address bar

Quick facts about Sky Broadband

Address to type: http://192.168.0.1
Used by: Sky Broadband hubs
Default username and password: admin, with the password sky or your Wi-Fi password, depending on the hub
Reset: Hold the reset button on the back for ten seconds, until the power light flashes
Where it opens: Only on a device connected to the Sky Hub

Which devices this page covers

Sky Hub and Sky Q Hub, which often use the password sky
Newer Sky Broadband Hubs, where the password can be the Wi-Fi password on the label
Sky Max Hub is managed through an app

How to log in to your Sky Hub

Make sure you are connected to your Sky broadband network, by Wi-Fi or cable.
Open a browser and type 192.168.0.1 in the address bar.
When asked to log in, enter the username admin. For the password, try sky first, and if that fails use your Wi-Fi password from the label. Which one works depends on your hub.
Open the Wireless or Wi-Fi settings to change the network name and password.
To go back to the defaults, hold the reset button on the back for ten seconds, until the power light flashes. A reset removes every change you made.

Example router label: the web address, username and admin password are the lines you need to log in, and they are different from the Wi-Fi name and password — Illustration only, not a photo of a real product. The login details are usually on a label under the router.

If the Sky Broadband page will not open

admin and sky are rejected: The password is sky on some hubs and your Wi-Fi password on others. Try the Wi-Fi password from the label. After a reset, the Wi-Fi password usually works as the login.
The status page opens but the settings ask me to log in: This is normal. You can see the overview, and the login appears when you open a settings page.
I want to keep my settings: Do not use the reset button. A reset removes every change you made and returns the username to admin and the password to sky.
I added my own router: See own router behind an ISP router.

How to keep your router secure

Change the default admin password and use a long one that you do not use anywhere else.
Keep the router firmware up to date.
Turn off remote management unless you really need it.
Use WPA2 or WPA3 for Wi-Fi.

Questions people ask about Sky Broadband

What is the Sky Hub login address?: 192.168.0.1.
What is the Sky Hub username and password?: admin, with the password sky or your Wi-Fi password depending on the hub.
How do I reset a Sky Hub?: Hold the reset button on the back for ten seconds until the power light flashes. It removes your changes.

Last checked 2026-10-03. Default logins differ by model, so always check the label on your router first. Brand and product names belong to their owners. This site is independent and is not affiliated with them. Sources: Sky Community: accessing your router settings page · RFC 1918: private address ranges

Free tools that help

Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.