What is the Speedport device password?

The password on the type label or the Wi-Fi device pass card. If you changed it, use the new one.

Does Belkin also use 192.168.2.1?

Yes, several makers do. See 192.168.2.1 .

Speedport Login: speedport.ip and 192.168.2.1

Open the Telekom Speedport router at speedport.ip or 192.168.2.1 and find the device password on the label.

Open this address: 192.168.2.1These open only from a device connected to your own router. They cannot be reached from the internet.

Telekom Speedport routers open at speedport.ip, and 192.168.2.1 is the number address that works the same way. You sign in with the device password printed on the router’s type label or on the Wi-Fi pass card, unless you changed it.

Not working? Try another address: 192.168.1.1 192.168.0.1 192.168.1.254 10.0.0.1 192.168.100.1 192.168.8.1

Speedport router login: type 192.168.2.1 in the browser address bar

Quick facts about Speedport

Address to type: http://speedport.ip or http://192.168.2.1
Used by: Telekom Speedport routers
Default username and password: The device password on the label or pass card, or the one you set
Where it opens: Only on a device connected to this router

Which routers this page covers

Speedport routers supplied by Telekom

How to log in to your Speedport router

Connect your phone or computer to the Speedport by Wi-Fi or LAN cable.
Open a browser and type speedport.ip. If the name does not load, type 192.168.2.1.
Enter the device password from the type label or pass card, then click Login.
Open the section you need, such as Internet or Telephony. Log out when you are done.

Example router label: the web address, username and admin password are the lines you need to log in, and they are different from the Wi-Fi name and password — Illustration only, not a photo of a real product. The login details are usually on a label under the router.

If the Speedport page will not open

speedport.ip does not load: The name only works when the Speedport is your DNS. Use 192.168.2.1 instead, and turn off any VPN.
192.168.2.1 does not load: Check you are connected to this router, not mobile data or another Wi-Fi. If your computer’s gateway shows a different address, use the router IP finder.
A search page opens instead of the router: Type http:// before the address, and type it in the address bar, not the search box.
Wrong username or password: The admin password is not your Wi-Fi password. Check the label on the router. If you changed it and forgot it, see the reset guide.
Two routers on the same address: If your own router sits behind an ISP box that uses the same range, see own router behind an ISP router.

How to keep your router secure

Change the default admin password and use a long one that you do not use anywhere else.
Keep the router firmware up to date.
Turn off remote management unless you really need it.
Use WPA2 or WPA3 for Wi-Fi.

Questions people ask about Speedport

What is the Speedport device password?: The password on the type label or the Wi-Fi device pass card. If you changed it, use the new one.
Does Belkin also use 192.168.2.1?: Yes, several makers do. See <a href="/router/192-168-2-1">192.168.2.1</a>.

Last checked 2026-10-11. Default logins differ by model, so always check the label on your router first. Brand and product names belong to their owners. This site is independent and is not affiliated with them. Sources: Telekom: set up your router without a reset (PDF) · RFC 1918: private address ranges

Free tools that help

Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.