What is the TRENDnet router IP address?

192.168.10.1 for routers. Many TRENDnet access points use 192.168.10.100.

What is the TRENDnet default password?

Usually admin, with the username admin. Some newer models ask you to set one at first login.

TRENDnet Router Login: 192.168.10.1 Admin Page

Open this address: 192.168.10.1 · 192.168.10.100These open only from a device connected to your own router. They cannot be reached from the internet.

TRENDnet routers use 192.168.10.1, which is different from the more common 192.168.1.1. TRENDnet access points often use 192.168.10.100. The usual login is admin with the password admin, and some newer models ask you to create a password at the first login.

Not working? Try another address: 192.168.1.1 192.168.0.1 192.168.1.254 10.0.0.1 192.168.100.1 192.168.8.1

TRENDnet router login: type 192.168.10.1 in the browser address bar

Quick facts about TRENDnet

Address to type: http://192.168.10.1 for routers, http://192.168.10.100 for many access points
Used by: TRENDnet routers and access points
Default username and password: admin and admin on most models. Newer models ask you to set a password
Where it opens: Only on a device connected to this router

Which devices this page covers

TRENDnet routers (192.168.10.1)
TRENDnet access points such as the TEW-755AP (192.168.10.100)

How to log in to your TRENDnet router

Connect your phone or computer to the TRENDnet router by Wi-Fi or cable.
Open a browser and type 192.168.10.1 in the address bar.
Enter admin and admin. A newer model may ask you to create a password instead.
Open the Wireless settings to change the network name and password, then save.

Example router label: the web address, username and admin password are the lines you need to log in, and they are different from the Wi-Fi name and password — Illustration only, not a photo of a real product. The login details are usually on a label under the router.

If the TRENDnet page will not open

192.168.10.1 does not load: Check that your device has an address starting with 192.168.10. Run ipconfig on Windows or ip route on Linux and look at the default gateway. See the router IP finder.
admin and admin are rejected: Hold the reset button for about 15 seconds to restore the factory settings. A reset erases your wireless, firewall and port forwarding settings.
The page opens but nothing loads: Set manual DNS servers such as 8.8.8.8 and 8.8.4.4 in the internet settings.

How to keep your router secure

Change the default admin password and use a long one that you do not use anywhere else.
Keep the router firmware up to date.
Turn off remote management unless you really need it.
Use WPA2 or WPA3 for Wi-Fi.

Questions people ask about TRENDnet

What is the TRENDnet router IP address?: 192.168.10.1 for routers. Many TRENDnet access points use 192.168.10.100.
What is the TRENDnet default password?: Usually admin, with the username admin. Some newer models ask you to set one at first login.

Last checked 2026-10-11. Default logins differ by model, so always check the label on your router first. Brand and product names belong to their owners. This site is independent and is not affiliated with them. Sources: Cleancss: TRENDnet router defaults · Busuk: TRENDnet router login · RFC 1918: private address ranges

Free tools that help

Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.