Do I need the Xfinity app to open 10.0.0.1?

Yes. Allow Admin Tool online access in the app first.

Is 10.0.0.1 the same as 192.168.1.1?

No. Both are private addresses, but 10.0.0.1 is in a different range. See the 10.0.0.1 page.

Xfinity Router Login: 10.0.0.1 and the Admin Tool

Open the Xfinity gateway admin page at 10.0.0.1, turn on Admin Tool access in the Xfinity app first, and fix login problems.

Open this address: 10.0.0.1These open only from a device connected to your own router. They cannot be reached from the internet.

Turn on Admin Tool online access in the Xfinity app first, then open http://10.0.0.1. Older gateways use admin and password, and newer ones have a unique password on the label. Check your label first.

Not working? Try another address: 192.168.1.1 192.168.0.1 192.168.1.254 10.0.0.1 192.168.100.1 192.168.8.1

Xfinity router login: type 10.0.0.1 in the browser address bar

Quick facts about Xfinity

Address to type: http://10.0.0.1
Used by: Xfinity (Comcast) gateways
Default username and password: admin, with a unique password on the label on newer gateways. Older gateways: admin and password
First step: Turn on Admin Tool online access in the Xfinity app
Where it opens: Only on a device connected to the gateway

Which devices this page covers

Xfinity xFi gateways
Older Xfinity gateways that use admin and password
Your own modem and router: use their own address instead

How to log in to your Xfinity gateway

Open the Xfinity app and go to WiFi, then View WiFi equipment, then Advanced settings.
Find Admin Tool online access, turn on Allow Admin Tool access, and save.
Open a browser on a device connected to the gateway and type http://10.0.0.1.
Log in with the username admin and the password on the gateway label. Older gateways use password.
Change the admin password if it is still the default, then log out.

Example router label: the web address, username and admin password are the lines you need to log in, and they are different from the Wi-Fi name and password — Illustration only, not a photo of a real product. The login details are usually on a label under the router.

If the Xfinity page will not open

10.0.0.1 does not open: Turn on Admin Tool online access in the Xfinity app first, then try again. Use http:// in front of the address.
The password on the label is rejected: The password may have been changed. A factory reset restores the label password and erases your settings. See the reset guide.
I use my own modem and router: The gateway page may not apply. Use the address of your own router. See own router behind an ISP router.
Related guide: See the 10.0.0.1 page.

How to keep your router secure

Change the default admin password and use a long one that you do not use anywhere else.
Keep the router firmware up to date.
Turn off remote management unless you really need it.
Use WPA2 or WPA3 for Wi-Fi.

Questions people ask about Xfinity

What is the Xfinity router IP address?: 10.0.0.1.
Do I need the Xfinity app to open 10.0.0.1?: Yes. Allow Admin Tool online access in the app first.
Is 10.0.0.1 the same as 192.168.1.1?: No. Both are private addresses, but 10.0.0.1 is in a different range. See the 10.0.0.1 page.

Last checked 2026-10-03. Default logins differ by model, so always check the label on your router first. Brand and product names belong to their owners. This site is independent and is not affiliated with them. Sources: Third-party guide that follows Xfinity’s steps · RFC 1918: private address ranges

Free tools that help

Subnet calculatorEnter an IPv4 address with a prefix or netmask to get the network, broadcast, host range, wildcard mask and usable hosts. Split into subnets.
Password generatorCreate a random password with the length and characters you choose. It runs in your browser, uses secure randomness and shows how strong it is.